PORSCHE 996 TURBO HEADS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items)
FVD spec. Billet 993gt2/993 turbo cylinder heads:
• interchangeable fit with GT2 & turbo standard cylinder head
• fully cnc machined from solid billet for maximum geometrical accuracy
• made from aerospace grade 2618 aluminum alloy, as commonly used for f1 & GT race pistons which has the highest possible material strength at elevated temperatures
• machined for 49.0 x 9.0 intake and 41.5 x 9.0 exhaust valves
• optimized combustion chamber reduces squish crevice volume - the effect of which increases chamber turbulence and results in higher flame speed, which improve's power, torque and efficiency.
• 15mm outside diameter sintered steel valve guides for reduced wear & improved valve support ...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,938.20
Make a selection
Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, along with the use of only the finest t304 stainless steel materials, it is easy to see why b&b has been an industry leader for over 20 years. B&b designs every system for increased performance, a distinctive tone that they have spent years perfecting and an appearance that will set your vehicle apart.
Features:
100% t304 stainless steel
General Fitment 911 1994-98
$3,494.06
Make a selection
FVD cylinder head gasket sets contain high quality German sourced gaskets, seals and o-rings. This kit contains a complete set of gaskets to make a teardown / rebuild more convenient. Sold as a complete set. 1 necessary per car. To complete the gasket set for the whole engine order please 93010090104eq too.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$2,279.20
Make a selection
These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,835.90
Make a selection
Head gasket set for 996 turbo and GT2 exclusive from FVD ! Set contains all gaskets and seals for an engine overhaul. Please order crankcase gasket set (996 100 996 tuam)separately.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,542.20
Make a selection
Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, along with the use of only the finest t304 stainless steel materials, it is easy to see why b&b has been an industry leader for over 20 years. B&b designs every system for increased performance, a distinctive tone that they have spent years perfecting and an appearance that will set your vehicle apart.
Features:
100% t304 stainless steel
General Fitment 911 1994-98
$2,991.36
Make a selection
Sold as a set. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,835.90
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$9,235.60
Make a selection
Highlights:
Made for up to 750°c (1,382°f) for street, some track use and rally use.
Low dust, high performance street pad with 20-25% % brake improvement.
Capable of repeated heavy brake use without brake ?fall-off?.
Very minimal disc/rotor damage characteristics.
Features red ?brake in? Surface coating for instant safe braking after install.
Superb material for European cars.
Ece r 90 type approved for most cars.
High performance lowest dust rating pads for prestige imports and faster street driving.
Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like ...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $264.97
Make a selection
Highlights: made for up to 750*c (1,382*f) for street, some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1994-98 911 1989-94 928 1992-95
From $266.20
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
2 x Ø90mm end tips oval
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$10,794.30
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,695.00
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
Modification cylinder head necessary.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
From $82.17
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,895.00
Make a selection
Modification cylinder head necessary.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
From $82.15
Make a selection
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Use only when already connecting rods with sps-carr-6 was delivered!
All other connecting rod needs to be sent to carrillo using this screw!
The s connecting rod bolt (sps-carr-6) needs to be replaced under race conditions only at every third overhauling the engine.
When replacing the screw lubricate the screw head and the thread. We recommend using a mixture of molybdenum-based paste with motor oil.
Torque 89 nm (65 foot pounds)
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94), 916 (70-76), 914-6 (70-...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 914 1970-76 911 1970-73
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|